Color Charts

💡 Quick Answer The ‘WB’ code on a Ford vehicle typically refers to the Wheelbase (measured in inches), not a paint color code. A 145-inch wheelbase is standard for Ford F-150 SuperCrew trucks with a 5.5-foot bed. Always verify your specific paint color by locating the exterior color code on the driver-side door jamb sticker,…

💡 Quick Answer The primary Ford Shadow Black paint code is G1. Introduced in 2015 to replace Tuxedo Black, Shadow Black (G1) is a non-metallic, solid black finish used across Ford’s lineup, including F-150, Mustang, and Explorer. Always verify your specific vehicle’s paint code using the Safety Compliance Certification Label located on the driver-side door…

💡 Quick Answer Ford Wimbledon White, an iconic automotive finish, is primarily identified by paint code ‘M’ across various models from 1960 to 1976. In some later applications, it may appear as ‘9A’. This code signifies the specific factory specification for this classic hue. Always verify the exact paint code on your vehicle’s door jamb,…

💡 Quick Answer The Ford Shelter Green paint code is primarily identified by codes such as ‘T’ or ‘R’, depending on the specific model year and vehicle line, predominantly used in the late 1960s and early 1970s. It represents a distinctive medium-dark green hue. To accurately confirm, always cross-reference the code found on your vehicle’s…

💡 Quick Answer Ford red paint codes identify the specific shade of red used on various models, typically found on the door jamb label or build sheet. These codes, spanning available model years through 2026, are crucial for accurate paint matching and repairs. Always cross-reference the code with your vehicle’s VIN and owner’s manual to…

💡 Quick Answer Ford Magnetic Grey Paint Code depends on the exact year, engine, trim, and configuration. Use the chart and notes in this guide as a starting point, then verify critical numbers with the official manual or vehicle label. 📌 Key Takeaway The Ford Magnetic Grey paint code is consistently identified as J7 across…

💡 Quick Answer Ford T7 paint codes identify the specific exterior color of your vehicle, typically found on the driver’s side door jamb label. These alphanumeric codes, spanning available model years through 2026, are crucial for accurate touch-ups or repainting. Always verify the code against your vehicle’s physical label or build sheet, as factory specifications…

💡 Quick Answer The Ford G2 paint code identifies a specific color finish for Ford vehicles, typically found on the driver’s side door jamb label, a build sheet, or within the VIN decoder for certain models. This code ensures accurate color matching for repairs or customization. Always verify the code against the vehicle’s physical label…

💡 Quick Answer Ford Magma Red is consistently identified by paint code G1 across all model years it was offered, typically from 2017 through 2023. While the code remains constant, always verify your vehicle’s specific paint code on the driver’s side door jamb label, owner’s manual, or build sheet to account for factory variations or…

💡 Quick Answer The Ford H5 paint code typically identifies a specific color, often a metallic or specialty shade, available across various Ford models. Its precise meaning and application can vary by model year and vehicle line. To accurately identify your Ford’s H5 paint code, always cross-reference the code found on your vehicle’s door jamb…

💡 Quick Answer The Ford N1 paint code primarily identifies a specific exterior color, such as ‘Oxford White’ or ‘Agate Black Metallic’, depending on the model year. While N1 consistently denotes a particular hue for a given period, its precise color name and shade can vary by model year and vehicle line. Always verify the…

💡 Quick Answer The Ford E4 paint code typically identifies ‘Vermillion Red’ or ‘Bright Red,’ a prominent color utilized across numerous Ford vehicle lines from approximately 1980 through the early 2000s, and for historical reference up to 2026. This critical code is predominantly located on the driver’s side door jamb label. However, confirming the code…

Quick Summary The precise Ford Lead Foot Gray paint code is J7, a highly sought-after, non-metallic color. This code is crucial for anyone needing to purchase matching touch-up paint, aerosol cans, or larger quantities for Ford vehicles like the F-150, Ranger, and Bronco Sport. The precise Ford Lead Foot Gray paint code is J7, a…

💡 Quick Answer Ford Paint Code Hx depends on the exact year, engine, trim, and configuration. Use the chart and notes in this guide as a starting point, then verify critical numbers with the official manual or vehicle label. Identifying your Ford vehicle’s precise paint code is crucial for any paint repair, restoration, or custom…

💡 Quick Answer The primary paint code for Ford Sonic Blue is ‘SN’, officially known as Sonic Blue Metallic. This distinct hue was notably prevalent on Ford models from 2002 to 2004, particularly on the Mustang, Focus, and F-Series. To ensure precise identification, always verify the ‘SN’ code against your vehicle’s door jamb label or…

💡 Quick Answer The Ford Marsh Gray paint code is predominantly ‘L9’, officially known as Marsh Gray Metallic, and has been consistently used across various Ford models from approximately 2018 through current model years (available through 2026). This code identifies the factory specification for the color. The most important caveat is always to verify the…

💡 Quick Answer Ford Glacier Gray Paint Code depends on the exact year, engine, trim, and configuration. Use the chart and notes in this guide as a starting point, then verify critical numbers with the official manual or vehicle label. 📌 Key Takeaway Ford’s Glacier Gray paint code is predominantly M7, often designated as ‘Glacier…

Quick Summary The Ford paint code DX typically refers to Aspen Green Metallic or Dark Shadow Grey, with the exact shade depending on the specific model and year of your Ford vehicle. Understanding this code is crucial for accurate paint matching and maintenance, whether you’re performing a touch-up or a larger repair. The Ford paint…

Quick Summary The Ford Calypso Green paint code is primarily ‘C’ for single-stage applications or ‘6E’ (M6910) for two-stage metallic versions, prominently featured on iconic Ford models like the Mustang and Bronco during the late 1960s. This guide provides comprehensive details for accurate identification, sourcing, and restoration of this classic color. The Ford Calypso Green…

💡 Quick Answer The Ford Blue Jeans Metallic paint code is consistently ‘F6’ across all model years and vehicle configurations it was offered. This popular deep blue metallic finish was available on various Ford trucks and SUVs from approximately 2012 through 2020. Always verify the ‘F6’ code on your vehicle’s door jamb label, service manual,…

Quick Summary The definitive paint code for Ford Blue Flame Metallic is Z1. This article provides step-by-step instructions on locating this code on your Ford vehicle and offers guidance for accurate paint purchases. The Ford Blue Flame Metallic paint code you are looking for is Z1, a distinctive shade that graced many popular Ford models….

💡 Quick Answer The Ford ‘AQ’ paint code typically refers to ‘Arizona Beige Metallic,’ a specific exterior color utilized across various Ford models and years. Identifying your vehicle’s precise paint code, including AQ, is crucial for accurate touch-ups or repainting. This code is usually found on the door jamb label, though verification through the VIN,…

💡 Quick Answer The Ford D1 paint code identifies a specific exterior color used across various Ford models, with its precise meaning and shade potentially varying by model year, configuration, and production plant. Typically found on the door jamb label or within the vehicle’s VIN, D1 is crucial for matching original factory specifications. Always cross-reference…

💡 Quick Answer Ford paint codes, such as ‘PQ’, are alphanumeric identifiers for a vehicle’s exact exterior color, crucial for repairs or touch-ups. While ‘PQ’ typically refers to specific shades like ‘True Blue Metallic’ or ‘Dark Blue Pearl’ depending on the model year, its precise meaning and associated color can vary significantly over time. Always…

💡 Quick Answer The Ford CX paint code is a critical alphanumeric identifier specifying the exact factory color of your vehicle, enabling accurate repairs and repaints. Typically found on the driver’s side door jamb label, this code can vary by model year and occasionally by manufacturing plant. Always cross-reference the code with your owner’s manual…

💡 Quick Answer Ford’s iconic Grabber Blue paint code typically identifies as ‘E’ or ‘L’ on older models, and ‘FQ’ on newer reintroductions, though specific codes can vary by model year and vehicle line. This vibrant color has adorned various Ford performance and enthusiast vehicles from its original introduction in the late 1960s through to…

💡 Quick Answer The Ford Avalanche Grey paint code is primarily ‘HUE’ (or M7426/HUE), a distinctive, flat gray shade offered across various Ford trucks and SUVs. This code is typically found on the driver’s side door jamb sticker, beneath the VIN, or on the vehicle’s build sheet. Always verify the code against your specific vehicle’s…