Ford Bronco Sport Dimensions: Garage Fit and Cargo by Trim
The 2026 Ford Bronco Sport is 173.1 inches long with the standard 1.5-liter configuration and 173.4 inches long as a standard 2.0-liter Badlands. Ford lists 175.1 inches for the two Sasquatch configurations covered below. It measures 82.2 inches across the open mirrors and 76.3 inches with the mirrors folded, according to the Ford Pro fleet guide.
For a garage, measure the narrowest point of the opening and use the width with the mirrors in the position you will actually use. For cargo, check the opening and load floor separately. Ford’s cargo rating ranges from 29.1 to 32.5 cubic feet behind the second row across the configurations in the chart, but a particular box can be too tall or wide to enter even when the available volume looks sufficient.
2026 Ford Bronco Sport exterior dimensions
- Length, covered configurations
- 173.1–175.1 in
- Height excluding options
- 70.4–72.1 in
- Width, mirrors open
- 82.2 in
- Width, mirrors folded
- 76.3 in
- Cargo behind second row
- 29.1–32.5 cu ft
Figures apply to the listed U.S. Ford Pro configurations. Measure roof accessories and cargo opening on your vehicle.
The table covers the U.S. 2026 Bronco Sport configurations detailed in the Ford Pro fleet guide. It uses Ford’s base equipment or specified Sasquatch package measurements. The Ford Bronco Sport overview separately lists 74.3 inches of body width without the mirrors and provides the standard 1.5- and 2.0-liter dimensions.
| Exterior dimension | Big Bend or standard Outer Banks | Outer Banks Sasquatch | Standard Badlands | Badlands Sasquatch |
|---|---|---|---|---|
| Overall length | 173.1 in | 175.1 in | 173.4 in | 175.1 in |
| Height excluding options | 70.4 in | 71.7 in | 71.5 in | 72.1 in |
| Width, mirrors open | 82.2 in | 82.2 in | 82.2 in | 82.2 in |
| Width, mirrors folded | 76.3 in | 76.3 in | 76.3 in | 76.3 in |
| Wheelbase | 105.1 in | 105.1 in | 105.1 in | 105.0 in |
| Minimum ground clearance | 7.8 in | 8.8 in | 8.1 in | 8.7 in |
The Bronco Sport specifications page allows comparison of additional trim and package details. For a vehicle with roof accessories, replacement tires, a lift, or added exterior hardware, check the actual height and length. Ford’s height line excludes options, and a figure from the table cannot account for something installed afterward.
Which width should I use?
Use 82.2 inches when driving through an opening with the mirrors extended. The 76.3-inch measurement describes the vehicle with the mirrors folded. Ford’s 74.3-inch figure is body width without the mirrors. Folding reduces the overall width, but the folded housings still extend beyond the body measurement.
The difference between mirror-open and mirror-folded width is 5.9 inches total. In a perfectly centered entry, that amounts to about 3 inches of additional clearance per side. This helps compare two measured widths, but it does not take into account angled entry, a garage door track, or a side wall that narrows farther inside.
How does the Sasquatch package change the footprint?
Compared with the standard Outer Banks in Ford’s table, the Outer Banks Sasquatch is 2.0 inches longer and 1.3 inches taller. Compared with the standard Badlands, the Badlands Sasquatch is 1.7 inches longer and 0.6 inch taller. The listed mirror widths are the same across these variants.
Ground clearance also changes, but ground clearance and roof height answer different questions. Ground clearance helps describe the space below the vehicle. Garage clearance depends on the highest actual point above the ground. Use the roof, antenna, or accessory height that applies to the exact vehicle when a low opening is the limiting factor.
Will a Bronco Sport fit in your garage?
Measure the narrowest point
Take the width between the closest obstacles, which could be a door frame, track, post, or stored equipment. The outside width of the opening may be larger than the usable space. Check the route the mirrors travel as you steer in. A straight-on measurement can understate how much room you need for an angled approach.
For example, an opening that measures 90 inches clear leaves 7.8 inches of total space around an 82.2-inch vehicle. That is 3.9 inches per side if centered with the mirrors open. A shelf, weather seal, steering correction, or uneven approach can consume that margin. Treat the arithmetic as a fit check and leave room for how you actually enter.
Check height with the door open
Measure the lowest point of the garage opening when the door is fully up. Check the track or opener if either hangs lower over the parking path. Then measure the actual vehicle at its tallest point, including a rack, roof box, or other accessory you leave installed. A Bronco Sport that clears the frame may still have an issue if the inside obstruction is lower.
With a 78-inch clear opening, the published 72.1-inch Badlands Sasquatch height leaves 5.9 inches of nominal vertical space before options and accessories. If your measured vehicle height is 72.1 inches and the roof accessory adds 6 inches above that point, the result is 78.1 inches, which exceeds the example opening. Measure the installed combination instead of relying on the accessory’s advertised dimensions.
Allow space to close the garage and open the liftgate
Compare the length of the actual vehicle with the usable depth from the closed garage door to the nearest wall, appliance, or shelf. Add room for where you stop the vehicle and for access around it. The difference between a 173.1-inch base configuration and the 175.1-inch Sasquatch is small on paper but can matter in a short garage with storage at one end.
Vehicle length also does not describe the liftgate’s movement. If you plan to load inside the garage, check the space behind and above the vehicle as the liftgate opens. A parking position that fits with the liftgate closed may need to move farther forward to load. A test fit with the exact configuration is useful when a few inches determine whether your setup works.
Cargo space behind the first and second rows
Ford’s cargo figures describe usable volume under its measurement method. Behind the second row is the number to use when keeping the rear seats available for passengers. Behind the first row describes maximum cargo volume with the second row folded. The two ratings answer different questions about what can come with you.
| 2026 Bronco Sport configuration | Behind second row | Behind first row |
|---|---|---|
| Big Bend or standard Outer Banks | 32.5 cu ft | 65.2 cu ft |
| Outer Banks Sasquatch | 29.4 cu ft | 60.6 cu ft |
| Standard Badlands | 29.4 cu ft | 60.6 cu ft |
| Badlands Sasquatch | 29.1 cu ft | 60.2 cu ft |
The standard 1.5-liter configuration leads this table by 3.4 cubic feet with the rear seats up and 5.0 cubic feet with them folded compared with the Badlands Sasquatch. If you regularly carry both rear passengers and gear, compare the first cargo column. If you mostly use the Bronco Sport with two people aboard, the folded-seat figure is more relevant.
Use the Ford Bronco Sport trim comparison for equipment differences that affect which model you want. Once you narrow down the trim and package, come back to the matching dimensions. A configuration with more off-road hardware may be attractive for other reasons even if the cargo figure is smaller.
Cargo opening and lift-in height
Use Ford’s opening dimensions when you need to load a rigid item. The numbers below describe the rear opening and sill, which are different from the width and height at other points inside the cargo area.
| Measurement from the 2026 Ford Pro guide | Standard Big Bend / Outer Banks | Outer Banks Sasquatch | Standard Badlands | Badlands Sasquatch |
|---|---|---|---|---|
| Rear opening height | 32.6 in | 31.3 in | 31.3 in | 31.2 in |
| Rear opening width at floor | 42.6 in | 43.1 in | 43.1 in | 43.1 in |
| Cargo lift-in height | 29.4 in | 32.2 in | 31.9 in | 32.6 in |
A 32-inch-tall rigid container has 0.6 inch of nominal height margin against the 32.6-inch standard opening. It exceeds the 31.2-inch Badlands Sasquatch opening by 0.8 inch if it must pass through upright. Even with a nominal fit, check how the opening curves and whether the container has handles or latches that protrude. If it can be tilted, check that it can be returned to its intended position inside.
Lift-in height matters if you load heavier items frequently. The Badlands Sasquatch sill is listed at 32.6 inches versus 29.4 inches for the standard Big Bend or Outer Banks. The 3.2-inch difference describes the height of the lift from the ground. It does not say how the cargo floor or item will sit once inside.
Measure the item and its path
Measure the widest, tallest, and longest points of the item, including wheels, handles, and packaging. Then check the opening and the path from the opening to where the item will sit. The opening width at floor level may differ from width higher up. An item that clears one point can meet trim, the wheel housings, or the seatbacks farther inside.
If you routinely carry the same stroller, toolbox, dog crate, or equipment case, bring it to a test fit or take a rigid template with the same dimensions. Confirm the rear-seat position, cargo floor configuration, and whether you can close the liftgate with the item in place. Cargo volume gives a comparison between trims, while a test fit answers whether that specific item will load.
Passenger space and the moonroof
Ford’s table lists 42.4 inches of front legroom and 36.9 inches of rear legroom across the compared configurations. Front headroom is 41.5 inches without a moonroof and 39.1 inches with one where available. The second row is listed at 41.7 inches. If front headroom is a deciding factor, sit in the actual configuration and set the seat to your driving position.
There are five seating positions, but available space changes as front passengers adjust their seats. If you plan to install a child seat or regularly carry adults behind a tall driver, try the second row with the front seat where you will use it. A legroom specification is useful for comparison and cannot account for the installed seat’s shape or your individual position.
Bronco Sport dimensions versus the full-size Bronco
The Ford Bronco Sport and full-size Ford Bronco use different dimensions. The full-size 2026 Bronco technical specifications distinguish two- and four-door body styles and include separate trim values. The word “Bronco” on a listing is not enough to choose the right garage or cargo chart.
For a buyer cross-shopping both, first confirm the full model name and body style. Our Bronco versus Bronco Sport comparison explains the broader differences. If you have one tight opening, compare the matching mirror width and overall height from each model’s source, then allow for accessories and the path into the space.
Build a short fit worksheet for your vehicle
Write the year, trim, package, and any additions on the same sheet before comparing dimensions. A dealer can confirm whether an Outer Banks has the Sasquatch package, while an owner of a used vehicle can measure any accessory that changes the footprint. When a listing combines stock photos and option descriptions, request the window sticker or measure the actual vehicle at the dealer.
For garage entry, write down three clear dimensions: the opening at mirror height, the lowest overhead obstruction along the path, and the depth with the door closed. Subtract the matching vehicle measurements, then check where the garage narrows or the approach turns. If you need access around the rear with the garage door shut, measure that space separately. The useful clearance is the gap at the point where you need to stand or open the liftgate.
For cargo, take two measurements at the opening and at least one inside where the item will sit. If you must keep the second row available, test the item in that configuration first. If you can fold part of the rear seat, measure the resulting clear path and check that your passenger and cargo arrangement is compatible with the instructions for the vehicle. Keep the cargo opening, volume, and occupied seating as separate entries so you can compare configurations without mixing their measurements.
Quick dimension questions
Is a Bronco Sport under 15 feet long?
Yes, for the configurations in the 2026 chart. The standard 173.1-inch model is about 14 feet 5 inches long. The 175.1-inch Sasquatch is about 14 feet 7 inches. A 15-foot space leaves only about 5 to 7 inches of nominal space after vehicle length, depending on the configuration. That is before any clearance for a closed garage door or access around the vehicle.
Is the Bronco Sport less than seven feet wide with the mirrors open?
Ford lists 82.2 inches, which is 1.8 inches narrower than seven feet in total. If the opening measures exactly seven feet clear, a perfectly centered vehicle would have only 0.9 inch on either side. Measure the opening and check the real approach before using that nominal fit.
What is the maximum cargo figure?
Ford lists 65.2 cubic feet behind the first row for the standard Big Bend and Outer Banks configurations covered here. The corresponding figure with the second row in use is 32.5 cubic feet. Use the right column for the seat setup you plan to keep, then measure any rigid cargo against the opening.
What should I measure first?
Measure the constraint that can rule out a fit. For a garage that is usually the narrowest opening, a low overhead obstruction, or the depth with the door closed. For a cargo item it is often the shortest opening dimension. Then match that measurement to the exact trim and package. The wheelbase, cargo volume, and body width all have uses, but only the corresponding measurement answers the particular fit question.