Ford Factory Window Tint Percentage

Last Updated on by David Jon

If you’re looking to get your Ford vehicle’s windows tinted, you might be wondering what the legal limit is for window tint darkness in your state. The percent of light that a window film allows through your car windows is called the VLT (visible light transmission), and each state has different regulations about how dark your tint can be. In general, most states allow a VLT of 50% or higher, but there are a few states with more restrictive laws.

Here’s a look at the VLT limits in each state so you can make sure your Ford’s window tint is within the law.

If you’re considering tinting your Ford’s windows, you might be wondering what the factory window tint percentage is. The answer varies depending on the model of Ford, but most models have a factory window tint percentage of 20%. This means that 20% of the visible light is allowed to pass through the windows.

While 20% may not seem like much, it can actually make a big difference in terms of comfort and privacy. If you live in a sunny area, or if you often drive during daylight hours, having a little bit of tint can help reduce glare and make it easier to see. It can also help keep your car cooler in summer months.

And if you value your privacy, a higher tint percentage can help deter would-be thieves or nosy neighbors from peeking into your car. Of course, there are some downsides to window tinting as well. Darker tints can make it harder to see out of your car at night, and they can also make your car look more suspicious to police officers (which could lead to getting pulled over more often).

If you’re considering tinting your windows, weigh the pros and cons carefully before making a decision.

Are Your Windows Tinted – Window Film vs Factory Privacy Glass

Ford F150 Factory Window Tint Percentage

If you’re looking to have your Ford F-150’s windows tinted, you might be wondering what the factory window tint percentage is. Unfortunately, there is no one-size-fits-all answer to this question, as the amount of tinting on a vehicle’s windows can vary depending on the make and model. However, we can give you some general guidelines to help you determine how much tinting you might need for your Ford F-150.

The level of darkness that is considered legal for automotive window film varies from state to state. In general, however, most states allow a minimum light transmission of around 35%. This means that if your Ford F-150 has its windows tinted at the factory with a film that allows 35% of light through, it will likely be in compliance with your local laws.

Of course, 35% light transmission is just the minimum; many people prefer their window tints to be darker than this. If you’re looking for maximum privacy and protection from the sun’s harmful rays, then you’ll want a window film that has a lower light transmission rating. Films with lower light transmission ratings are typically darker in color and may even appear almost black when viewed from outside the vehicle.

No matter what level of darkness you choose for your Ford F-150’s window tint, remember to have it installed by a professional who knows how to do it properly. Improper installation can result in bubbling or peeling of the film, which not only looks bad but can also reduce its effectiveness at blocking UV rays and keeping out unwanted prying eyes.

Gm Factory Window Tint Percentage

If you’re looking to add a little privacy to your GM ride, window tint is the way to go. But how dark can you go? Well, that all depends on the state or province in which you live.

In the United States, window tint darkness is measured by the percent of light that passes through the film and glass. The lower the number, the darker the tint. So what’s an acceptable level of darkness for GM factory window tint?

For many years, GM has adhered to a standard 50% VLT (visible light transmission) for front windshields and 30% VLT for side and rear windows. This means that 50% of incoming light is allowed to pass through the front windshield, while only 30% is allowed through side and rear windows. While this may seem like a relatively dark tint, it actually provides good visibility for nighttime driving while still maintaining a high level of privacy during daylight hours.

So there you have it! If you’re looking to add some privacy to your GM ride without sacrificing too much visibility, factory-tinted windows are a great option.

Ford Explorer Factory Tint Percentage

If you’re looking to add a little privacy to your Ford Explorer, you might be wondering what the factory tint percentage is. Well, the good news is that the Explorer comes with a fairly dark tint from the factory. The rear windows are 70% tinted and the front windows are 50% tinted.

So if you’re looking for maximum privacy, you might want to consider adding an aftermarket film with an even darker tint.

What Tint Matches Factory Tint

If you’re looking to match the factory tint on your car, there are a few things you’ll need to take into account. The first is the type of film that was originally installed at the factory. Most factories use a dyed film, which means that it’s created by adding colorants to the adhesive side of the film.

This results in a darker shade on your windows. The second factor to consider is the percentage of light that’s being blocked by the film. In general, a 50% tint will look similar to the factory tint on most cars.

However, if your car came with a very light tint from the factory, you may want to go with a slightly darker tint so that it’s more visible. Finally, you’ll need to decide what kind of look you’re going for. If you want something that looks exactly like the factory tint, then you should stick with a dyed film.

But if you’re looking for something that has a little more personality, then you might want to try out a metallic or reflective film. These films have tiny metal flakes embedded in them, which give them a shiny finish and make them stand out more than traditional tints.

Ford Factory Window Tint Percentage

Credit: www.youtube.com

What Percentage is Ford Factory Tint?

Most Ford factory tints are in the 5% to 20% range. This means that they allow 5% to 20% of the light that hits the window to pass through. The lower the number, the darker the tint.

What is Ford’S Factory Tint?

Ford’s factory tint is a special type of window film that is applied to the windows of Ford vehicles during the manufacturing process. This tint is designed to reduce glare and heat inside the vehicle, and it also helps to protect the interior from UV rays. The factory tint is a darker shade than what is typically applied to aftermarket window tints, and it can only be removed by a professional.

What Tint Comes from Factory F150?

All Ford F-150 trucks come with a factory-installed tinted glass. This helps to reduce the amount of sunlight that comes into the cab, making it more comfortable for the driver and passengers. The level of tinting may vary slightly from one model to another, but all Ford F-150 trucks have some level of tinted glass.

What Percent is Most Factory Tint?

The percentage of tint on a car’s windows is typically between 20 and 50 percent. The most common factory tint percentages are 35, 20, 15, and 5 percent.


If you’re looking to have your Ford’s windows tinted, you’ll need to know the factory window tint percentage. The amount of tinting on a car’s windows is measured by the Visible Light Transmission (VLT) rate. This tells you how much light is allowed to pass through the film and glass.

For Ford vehicles, the VLT percentages range from 15% to 50%. The lower the number, the darker the tint will be.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *