2017 Ford Escape Cooling Fan Relay Location
Last Updated on by Axle McRoad
The cooling fan relay on a 2017 Ford Escape is located in the engine bay, on the driver’s side.
When it comes to finding the cooling fan relay on your 2017 Ford Escape, there are a few things that you will want to keep in mind. First, the relay is going to be located in the engine bay, so you will need to pop the hood and take a look around. Second, the relay is usually going to be mounted on or near the radiator, so that is another area to check. Finally, if you still can’t find the relay, consult your Escape’s owner’s manual for more specific information.
Once you have located the cooling fan relay, it is time to test it to see if it is working properly. To do this, you will need to use a multimeter. First, set the multimeter to the “ohms” setting. Next, disconnect the relay from its power source by unplugging it from the socket. Finally, touch the black lead of the multimeter to the ground terminal on the relay, and then touch the red lead to the “input” terminal on the relay. If the multimeter reads zero ohms, then the relay is working properly. If not, then it will need to be replaced.
What Is The Cooling Fan Relay Location For The 2017 Ford Escape?
In the 2017 Ford Escape, the cooling fan relay is located in the smart junction box.
When your 2017 Ford Escape’s engine is running, the cooling fan kicks on to help cool down the engine. The cooling fan relay is responsible for turning the cooling fan on and off. When the engine is cool, the relay will turn the fan off. When the engine is getting hot, the relay will turn the fan on.
The cooling fan relay is located in the engine bay, on the driver’s side. It is usually mounted on the fender, near the battery.
If your Escape’s cooling fan is not working, the first thing to check is the cooling fan relay. If the relay is bad, it will need to be replaced.
How Do I Know If My Cooling Fan Relay Is Bad?
If your cooling fan relay is bad, your engine will overheat.
Your car’s cooling fan relay is responsible for powering the cooling fans. When the engine coolant temperature gets too high, the relay will activate the fans to cool down the engine. If your cooling fan relay is bad, your cooling fans will not turn on, and your engine could overheat.
There are a few ways to tell if your cooling fan relay is bad. One way is to listen for the fans. If the engine is running hot and the fans are not turning on, the relay may be bad. Another way to tell is to check the engine’s cooling system. If the coolant level is low, or if there are no coolant leaks, the relay may be bad.
If you think your cooling fan relay is bad, it’s important to have it checked out by a mechanic. A bad relay can cause your engine to overheat, which can lead to serious engine damage.
FAQ
What Are The Symptoms Of A Bad Cooling Fan Relay?
How Do I Replace A Cooling Fan Relay On A 2017 Ford Escape?
2.Remove the relay box cover to access the fuses and relays.
3.Remove the relay in question by pulling it straight out.
4.Install the new relay in the socket where you removed the old one.
5.Close the relay box cover and the hood.
Conclusion
The Ford Escape is a compact SUV that has been in production since 2001. The 2017 model is the third generation of the Escape and features a number of upgrades from previous models. One upgrade is the addition of a cooling fan relay. The cooling fan relay is located in the engine bay near the cooling fan.
Is everything clear now? If you still have any questions, don’t hesitate to ask in the comments section below.
