Ford Explorer Check Engine Light
If your Ford Explorer’s check engine light is on, it means that the vehicle’s on-board diagnostic system has detected a problem. The light could be indicating a minor issue, such as a loose gas cap, or a more serious problem, such as a misfiring engine.
If the light is on, it’s important to have the vehicle checked out by a qualified technician as soon as possible. They will be able to hook up a special diagnostic tool to the vehicle’s computer and read any trouble codes that have been stored. This will help them to quickly identify the problem and get it fixed.
In some cases, the check engine light may come on due to a problem that is not related to the engine. For example, if the light is on and the vehicle is also experiencing problems with the brakes, it could be due to low brake fluid levels.
If you’re not sure what the problem is, it’s always best to err on the side of caution and have the vehicle checked out. Ignoring the light could lead to further damage to the vehicle and may even void your warranty.
What Does The Ford Explorer Check Engine Light Mean?
The Ford Explorer check engine light is a signal that something is wrong with the vehicle’s engine. When this light comes on, it means that the vehicle’s computer has detected an issue with the engine. This could be something as simple as a loose gas cap, or it could be something more serious. If the light is ignored, it could lead to more serious engine problems.
If you see the Ford Explorer check engine light come on, the first thing you should do ispull over and turn off the engine. Then, you will want to check the vehicle’s engine code. This can be done by using a code reader or by taking the vehicle to a local dealership or mechanic. Once you have the engine code, you can look up what it means and how to fix it. In most cases, the fix will be something simple that you can do yourself. However, if the engine code is something more serious, you may need to take the vehicle to a mechanic or dealership for repairs.
How Do I Reset The Check Engine Light On My Ford Explorer?
If your Ford Explorer is model year 1996 or newer, you can reset the check engine light by doing the following:
1. Locate the diagnostic link connector under the hood. On most Ford vehicles, this will be on the driver’s side near the fender.
2. Using a jumper wire, connect terminal A to terminal B.
3. Start the vehicle and turn the key to the “On” position, but do not start the engine.
4. After about 5 seconds, turn the key to the “Off” position.
5. Remove the jumper wire and reconnect any loose wires.
6. Start the vehicle to see if the check engine light is reset.
If your Ford Explorer is model year 1995 or older, you will need to have the vehicle diagnosed by a professional to reset the check engine light.
What Could Be Causing The Check Engine Light To Come On In My Ford Explorer?
The most common reason is that the gas cap is not tight enough. The light will also come on if the engine is running too hot, the oil is low, or there is an issue with the emission control system. If the light is flashing, that means there is a serious problem and you should take the car to a mechanic right away.
Is It Safe To Drive With The Check Engine Light On In My Ford Explorer?
Yes, it is safe to drive your Ford Explorer with the check engine light on. However, you should get the problem checked out as soon as possible.
The check engine light is a warning that something is wrong with your vehicle. It could be something as simple as a loose gas cap, or it could be something more serious like a problem with the engine.
If you keep driving with the check engine light on, you could end up damaging your engine. That’s why it’s important to get the problem checked out as soon as possible.
If you’re not sure what’s wrong with your vehicle, you can take it to a mechanic and have them run a diagnostic test. This will help them pinpoint the problem and get it fixed quickly.
In short, yes it is safe to drive your Ford Explorer with the check engine light on, but you should get the problem checked out as soon as possible to avoid any further damage.
What Should I Do If The Check Engine Light Comes On In My Ford Explorer?
If your Ford Explorer’s check engine light comes on, don’t panic! This is a common problem and there are a few things you can do to fix it.
First, check to see if your gas cap is loose. If it is, tighten it and see if the light goes off. If the light doesn’t go off, then you’ll need to take your Explorer to a mechanic to have it checked out.
There are a few other things that can cause the check engine light to come on, but a loose gas cap is the most common. So, if your light comes on, don’t freak out, just check your gas cap and go from there.
If you’re still experiencing issues with your Ford Explorer check engine light, please leave a comment below and we’ll be happy to help.