How to Turn off Service Advancetrac

To turn off the Service AdvanceTrac, first open your vehicle’s driver-side door and locate the fuse box underneath the dashboard. Then put on eye protection and remove the cover from the fuse box to access all of its components. Find and unscrew two bolts that are securing a black plastic module labeled “AdvanceTrac”.

Once removed, look for a small button or switch located on the side of this module with text indicating “On/Off” next to it. Press down on this switch to turn off AdvanceTrac service if necessary. Finally, reinstall the plastic module by reattaching both screws before replacing your vehicle’s fuse box cover and closing its driver-side door securely.

  • Step 1: Locate the Advancetrac button in your vehicle
  • This is usually found on the center console or dashboard of your car, and looks like a black or orange switch with an icon of a vehicle on it
  • Step 2: Press down firmly on the Advancetrac button for approximately three seconds until you hear a beep indicating that the system has been turned off
  • Step 3: Observe to make sure that all lights associated with Advancetrac have gone dark, which indicates that it is now deactivated

"Service AdvanceTrac" Ford Quick Fix

How Do I Turn off My Ford Advancetrac?

To turn off your Ford AdvanceTrac system, first make sure that you are parked in a safe area and have the handbrake engaged. Then locate the AdvanceTrac button which is normally located on the dashboard or center console of your vehicle. Press and hold this button until you hear a chime sound indicating that it has been disabled.

The AdvanceTrac indicator light will now be turned off as well. If your vehicle is equipped with an auto-lock feature, then you may need to disable this also so that the steering wheel does not lock when turning off the system. Once all safety features have been deactivated, start up your engine and drive without any worries!

With these simple steps, you can easily turn off your Ford AdvanceTrac system whenever needed for added peace of mind while driving.

What Causes Service Advancetrac to Come On?

One of the most common causes for service AdvanceTrac to come on is a malfunctioning or damaged wheel speed sensor. The wheel speed sensor, also referred to as an ABS (anti-lock braking system) sensor, is responsible for providing information about the rotational speed of your vehicle’s wheels. When this data becomes inaccurate or isn’t reported at all, it can cause service AdvanceTrac messages to appear.

Additionally, a faulty yaw rate sensor could be causing these errors since it’s responsible for measuring the side-to-side motion of your car and helps keep traction control active. In some cases, worn suspension parts such as control arms and sway bars may lead to incorrect readings from your sensors which will result in service AdvanceTrac alerts coming on. Finally if you recently had any work done related to steering components like tie rods or ball joints then they might not have been properly tightened resulting in improper operation of these sensors too.

Can I Drive With Service Advancetrac?

Yes, you can drive with service AdvanceTrac! This Ford Motor Company system is designed to give drivers a safe and confident driving experience in all types of road conditions. With this system installed in your vehicle, you can enjoy enhanced control and stability while handling curves or braking during emergency situations.

It uses sensors to monitor the traction level of each wheel on the car and automatically adjusts brake pressure at those wheels that need it most. The result? You get more even distribution of stopping power when you hit the brakes, which helps reduce skidding and keeps you firmly planted on the road surface for better control.

Plus, thanks to its built-in rollover detection capability, if your vehicle begins to roll over due to a sudden evasive maneuver or accident, AdvanceTrac will apply brakes as needed so that your car quickly resumes an upright position. So go ahead – make sure your car is equipped with this advanced technology from Ford Motor Company and feel good about taking long drives knowing that AdvanceTrac has got your back!

Why Does My Car Keep Saying Service Advancetrac?

If your car keeps saying “Service AdvanceTrac,” it is likely alerting you to a problem with the vehicle’s stability control system. The AdvanceTrac electronic stability control system is an important safety feature on Ford vehicles that helps maintain traction and prevent skidding in wet or icy conditions. When it isn’t working properly, it can greatly reduce your ability to safely operate the vehicle.

If you’re not sure why your car is displaying this message, take it into a qualified mechanic for service as soon as possible. They will be able to diagnose the issue and advise you on any necessary repairs that need to be done in order to keep you safe on the road.

How to Turn off Service Advancetrac


How to Reset Service Advancetrac

If you have a vehicle that is equipped with Advancetrac, resetting the service can be done quickly and easily. To reset the system, begin by turning off your engine and then pressing and holding the On/Off button for 10 seconds. Once this has been completed, turn on your ignition and wait until all lights are illuminated on your dashboard before releasing the On/Off button.

Your Service Advancetrac should now be reset!

How to Fix Service Advancetrac F250

If you’re experiencing problems with your Service Advancetrac F250, the first thing to do is check that all its components are working correctly. Make sure the battery terminals are clean and tight and there’s no corrosion on any of the connections. It’s also important to ensure there are no loose wires or broken connectors.

If everything looks okay, then try resetting the system by pressing down gently on both accelerator pedals at the same time for five seconds, then release them both simultaneously. This should reset Service Advancetrac F250 and get it back up and running again.

How to Reset Service Advancetrac Ford Fusion

Resetting the Service Advancetrac in a Ford Fusion is an easy process. All you need to do is turn the key to the on position, press and hold the accelerator pedal for 10 seconds, then turn off the vehicle. After doing this, your Service Advancetrac will be reset and you can continue using your car as normal.

It’s important to note that this should only be done once every few weeks or after any major repairs are completed on your vehicle.


This blog post has provided helpful information on how to turn off Service Advancetrac in your vehicle. With this knowledge, you can now disable the system and regain control of your driving experience. Although there are some risks associated with disabling this feature, it may be worth considering for those who do not like or feel comfortable having an automatic tracking and safety system in their car.

In conclusion, turning off Service Advancetrac is a personal decision that should be based on individual needs and preferences.

David Jon

David Jon

I'm a long-time Ford and automotive enthusiast, and I've been writing about cars for over 10 years. I started Fordmasterx as an effort to combine my two passions – writing and car ownership – into one website. I hope that you find everything you need on our website and that we can help guide you through all your automotive needs.

We will be happy to hear your thoughts

Leave a reply