The Ford 302 HEI distributor firing order is 1-5-4-2-6-3-7-8. The distributor cap is numbered clockwise, starting with the #1 position at the top left. The firing order is the reverse of the cylinder number order.
What Is The Firing Order Of A Ford 302 HEI Distributor?
One of the most common questions we get here at Ford Performance Tech is what is the firing order of a Ford 302 HEI distributor. The firing order is the order in which the cylinders fire. The firing order of a Ford 302 HEI distributor is 1-5-4-2-6-3-7-8. The reason the firing order is important is because it ensures that the spark plugs fire in the correct order. If the firing order is not correct, the engine will not run properly.
A real-life example of this would be if someone were to ask you what the firing order is for a Ford 302 HEI distributor. You would tell them that the firing order is 1-5-4-2-6-3-7-8.
What Is The Distributor Cap Rotation For A Ford 302 HEI Distributor?
The distributor cap rotation is clockwise.
What Is The Spark Plug Gap For A Ford 302 HEI Distributor?
If you’re working on a Ford 302 HEI distributor, you’ll need to know the spark plug gap. The spark plug gap is the distance between the electrode and the tip of the spark plug. It’s important to have the right gap so that the spark can jump across and ignite the fuel in the engine.
The spark plug gap for a Ford 302 HEI distributor is 0.060 inches. To set the gap, you’ll need a feeler gauge. Insert the feeler gauge into the gap and adjust the electrode until you feel a slight drag. That’s the perfect gap.
If you’re having trouble getting the spark plug gap right, don’t worry. You can always take it to a mechanic and have them take a look. They’ll be able to set the gap for you so that your engine runs smoothly.
What Is The Coil Resistance For A Ford 302 HEI Distributor?
If you’re looking to find the coil resistance for a Ford 302 HEI distributor, there are a few things you’ll need to know first. The HEI distributor is an ignition system that was used on many General Motors vehicles from the 1970s until the 1990s. It’s known for its high energy output and reliability.
To find the coil resistance for a Ford 302 HEI distributor, you’ll need a few tools. First, you’ll need a digital multimeter. This will be used to measure the resistance of the coil. You’ll also need a screwdriver to remove the distributor cap.
Once you have your tools, the first thing you’ll want to do is remove the distributor cap. To do this, unscrew the two screws that hold the cap in place. Once the cap is off, you’ll be able to see the coil.
Next, use your multimeter to test the resistance of the coil. To do this, set your multimeter to the ohm setting and touch the probes to the terminals on the coil. The resistance should be between 0.5 and 1.5 ohms. If it’s outside of this range, the coil may be damaged and will need to be replaced.
Once you have the resistance, you can now use this information to find the correct replacement coil for your Ford 302 HEI distributor. Keep in mind that the resistance may vary slightly from one manufacturer to another, so it’s important to double-check the resistance before you purchase a replacement coil.
Now that you know how to find the coil resistance for a Ford 302 HEI distributor, put your new knowledge to the test by finding the correct replacement coil for your vehicle.
Conclusion
The Ford 302 HEI Distributor firing order is 1-5-4-2-6-3-7-8.
I hope that this explanation was clear. If you have any questions, please leave a comment below.
David Jon
I'm a long-time Ford and automotive enthusiast, and I've been writing about cars for over 10 years. I started Fordmasterx as an effort to combine my two passions – writing and car ownership – into one website. I hope that you find everything you need on our website and that we can help guide you through all your automotive needs.
