Most 2018 Ford F-150s will have a 6×135 bolt pattern. This is a common pattern used on many Ford trucks and SUVs. There are some exceptions though. Some 2018 F-150s will have a 6×5.5 bolt pattern. This is the same pattern that is used on the Ford Raptor. There are also a few 2018 F-150s that will have a 5×135 bolt pattern. This is the same pattern that is used on the Ford Mustang.
What Is The 2018 Ford F150 Bolt Pattern?
The 2018 Ford F150 bolt pattern is a measure of the distance between the lug holes in the wheel. It is a critical measurement when it comes to choosing the right wheels for your truck.
The most common bolt pattern for the Ford F150 is a 5x135mm. This means that there are 5 lug holes and the distance between them is 135mm.
If you’re not sure what bolt pattern your truck has, the best way to find out is to consult your owner’s manual. Or, you can take a look at the wheels that are currently on your truck. The bolt pattern will be imprinted on the back of the wheel.
When you’re ready to shop for new wheels, keep the 2018 Ford F150 bolt pattern in mind. That way, you can be sure to find the wheels that will fit your truck perfectly.
How Do I Measure The 2018 Ford F150 Bolt Pattern?
2018 Ford F150 bolt pattern – Measuring the 2018 Ford F150 bolt pattern is easy and only takes a few minutes. Here’s a step-by-step guide:
1. Find a flat surface to measure on. You’ll need to use a tape measure or ruler to get an accurate measurement.
2. Place the tape measure or ruler at the center of one of the bolts.
3. Measure from the center of the bolt to the outer edge of the wheel. Repeat this process for the other three bolts.
4. Once you have the measurements for all four bolts, you can calculate the bolt pattern. The bolt pattern is simply the distance between the bolts, multiplied by the number of bolts.
For example, if the distance between two bolts is 3 inches (7.62 cm), and there are four bolts, the bolt pattern would be 3 x 4, or 12 inches (30.48 cm).
5. That’s all there is to it! Measuring the 2018 Ford F150 bolt pattern is easy and only takes a few minutes.
What Is The Lug Nut Torque Specification For The 2018 Ford F150 Bolt Pattern?
If you’re planning on doing any work on your 2018 Ford F150, it’s important to know the torque specification for the lug nuts. The lug nut torque specification for the 2018 Ford F150 bolt pattern is 98 ft-lbs. This means that you should torque the lug nuts to 98 ft-lbs when you’re tightening them.
If you’re not familiar with torque, it’s basically the amount of force that you’re applying to the lug nut when you’re tightening it. The higher the torque specification, the tighter the lug nut should be. In this case, you want to make sure that the lug nuts are nice and tight so that they don’t come loose while you’re driving.
Now that you know the lug nut torque specification for the 2018 Ford F150 bolt pattern, you can get to work on your truck. Just make sure that you torque the lug nuts to the correct specification and you’ll be good to go.
What Is The Wheel Offset For The 2018 Ford F150 Bolt Pattern?
The 2018 Ford F150 has a bolt pattern of 5 x 135 mm. The wheel offset for this bolt pattern is -32 mm. This means that the wheels on this vehicle are 32 mm closer to the centerline of the vehicle than the wheels on other vehicles with the same bolt pattern.
The wheel offset for a vehicle can be important when choosing new wheels. A wheel with a different offset than the original wheels can change the way the vehicle handles. A wheel with a smaller offset will make the vehicle more stable, while a wheel with a larger offset will make the vehicle more agile.
When choosing new wheels for your 2018 Ford F150, make sure to take the offset into consideration. You may want to choose wheels with the same offset as the original wheels, or you may want to experiment with a different offset to see how it affects the way your vehicle handles.
What Is The Tire Size For The 2018 Ford F150 Bolt Pattern?
If you’re in the market for a new 2018 Ford F150, you may be wondering what the tire size and bolt pattern is. Here’s a quick rundown of the specs so you can make sure your new truck has the right tires.
The 2018 Ford F150 comes with either a 5.0L V8 engine or a 3.5L Ecoboost V6 engine. The V8 engine has a max towing capacity of 11,300 lbs, while the V6 can tow up to 8,500 lbs.
Both engines come with a six-speed automatic transmission. The V8 has 17-inch wheels with a 18-inch option, while the V6 has 18-inch wheels with a 20-inch option.
The V8 engine has a tire size of P275/65R18, while the V6 engine has a tire size of P255/70R18. The bolt pattern for both engines is 5 x 135mm.
So, if you’re looking for a new 2018 Ford F150, be sure to keep these tire and bolt pattern specs in mind. And, be sure to visit your local Ford dealer to test drive the truck and find the perfect tires for your new ride.
Hopefully, you are clear on the 2018 ford f150 bolt pattern now. If you still have any questions, please feel free to comment below.