The 2013 ford escape blower motor resistor is located in the engine compartment on the passenger side.
The 2013 Ford Escape has a blower motor resistor that is located under the hood on the passenger side. The blower motor resistor is responsible for controlling the speed of the blower motor. If the blower motor resistor fails, the blower motor will only work on the highest setting. The blower motor resistor is a common failure item on the Ford Escape.
What Is The Purpose Of The 2013 Ford Escape Blower Motor Resistor?
The purpose of the 2013 ford escape blower motor resistor is to regulate the current to the blower motor.
When your 2013 Ford Escape’s blower motor isn’t working, one possible culprit is the blower motor resistor. The blower motor resistor is an electrical component that is attached to the blower motor. Its purpose is to control the speed of the blower motor. When the blower switch is in the “1” position, the resistor sends minimal voltage to the blower motor, which results in low speed. As you move the switch to higher settings, the resistor sends more voltage to the blower motor, which results in higher speeds. If the blower motor resistor is not working properly, it may not send enough voltage to the blower motor, which will result in low or no airflow from the vents.
How Does The 2013 Ford Escape Blower Motor Resistor Work?
The resistor controls the amount of current flowing to the blower motor.
When you start your 2013 Ford Escape, you may notice that the blower motor doesn’t work. This is because the blower motor resistor is not working. The blower motor resistor is a small component that is responsible for controlling the speed of the blower motor. When the resistor fails, the blower motor will not work.
To replace the blower motor resistor, you will need to remove the glove box. There are two screws that hold the glove box in place. Remove these screws and then pull the glove box out. Behind the glove box, you will see the blower motor resistor. Disconnect the electrical connector and then remove the two bolts that hold the resistor in place.
Install the new blower motor resistor and then reconnect the electrical connector. Install the glove box and then test the blower motor to make sure it is working properly.
FAQ
Where Is The 2013 Ford Escape Blower Motor Resistor Located?
What Are The Symptoms Of A Failing 2013 Ford Escape Blower Motor Resistor?
1. The blower motor will not turn on.
2. The blower motor will only work on high speed.
3. The blower motor will make a buzzing noise.
4. The blower motor will smell like it is burning.
Conclusion
If you are having trouble with your 2013 Ford Escape’s blower motor resistor, you may need to replace it. You can find replacement parts at most auto parts stores.
I hope that you understand now. If you have any questions, please leave a comment below.
David Jon
I'm a long-time Ford and automotive enthusiast, and I've been writing about cars for over 10 years. I started Fordmasterx as an effort to combine my two passions – writing and car ownership – into one website. I hope that you find everything you need on our website and that we can help guide you through all your automotive needs.
