The brake light fuse for a 2013 Ford Escape is located in the fuse box under the hood.
If you’re driving a 2013 Ford Escape, and you notice that your third brake light isn’t working, there’s a good chance that the fuse has blown. Fortunately, this is a relatively easy problem to fix. Here’s what you need to do:
1. Locate the fuse box. It should be under the hood, on the driver’s side.
2. Find the fuse for the third brake light. It’s usually labeled.
3. Remove the fuse and check it to see if it’s blown. If it is, replace it with a new one.
4. Put the fuse box cover back on and you’re done!
If your third brake light still isn’t working after replacing the fuse, there may be a bigger problem. Consult a mechanic to diagnose and fix the issue.
Where Is The 2013 Ford Escape 3rd Brake Light Fuse Located?
The 2013 ford escape 3rd brake light fuse is located in the fuse panel on the right hand side of the dash.
If you’re like most people, you probably don’t think about your car’s brake lights until they stop working. And then, you’re probably in a rush to figure out what the problem is and how to fix it.
For some cars, the brake light fuse is easy to find and replace. But for others, it can be more difficult. If you have a 2013 Ford Escape, you’re in luck, because the brake light fuse is located in the fuse box on the right side of the engine compartment.
To replace the fuse, first locate the fuse box and then the fuse for the brake lights. Once you have the fuse, simply remove it and replace it with a new one. If the fuse is blown, you’ll need to get a new one from your local auto parts store.
If your brake lights are still not working after replacing the fuse, the problem could be with the brake light switch, the bulbs, or the wiring. You’ll need to troubleshoot each of these components to find the issue.
How Do I Replace The 2013 Ford Escape 3rd Brake Light Fuse?
Replace the 2013 ford escape 3rd brake light fuse by finding the fuse box and replacing the fuse.
1. Locate the fuse panel. This is usually located under the dash on the driver’s side of the vehicle.
2. Find the fuse for the third brake light. It will be labeled accordingly.
3. Remove the old fuse and replace it with a new one of the same amperage.
4. Test the third brake light to make sure it is working.
5. If it is not working, check the fuse again to make sure it is seated properly and has not blown.
As always, consult your owner’s manual for specific information on your vehicle.
FAQ
What Is The Purpose Of The 2013 Ford Escape 3rd Brake Light Fuse?
Is The 2013 Ford Escape 3rd Brake Light Fuse The Same As The 2nd Brake Light Fuse?
Conclusion
The 2013 Ford Escape has a fuse for the third brake light. This fuse is located in the engine compartment.
Hopefully, you are clear on the 2013 ford escape 3rd brake light fuse. If you have any questions, feel free to comment below.
David Jon
I'm a long-time Ford and automotive enthusiast, and I've been writing about cars for over 10 years. I started Fordmasterx as an effort to combine my two passions – writing and car ownership – into one website. I hope that you find everything you need on our website and that we can help guide you through all your automotive needs.
