2004 Ford Freestar Transmission Removal

To remove the transmission from a 2004 Ford Freestar, the engine and transmission mounts must first be removed.

If you need to remove the transmission from your 2004 Ford Freestar, there are a few things you’ll need to do. First, disconnect the negative battery cable. Next, drain the transmission fluid. To do this, remove the drain plug from the bottom of the transmission and allow the fluid to drain into a catch pan. Once the fluid is drained, remove the shifter cable from the transmission.

Now it’s time to remove the transmission mount. There are three bolts that hold the transmission mount to the frame. Remove these bolts and the transmission mount can be removed. With the transmission mount removed, the transmission can now be lowered down and removed from the vehicle.

Removing the transmission from your 2004 Ford Freestar isn’t too difficult, but it is a bit time consuming. Make sure you have plenty of time and patience before starting this project.

What Is The Process For Removing The Transmission From A 2004 Ford Freestar?

The process for removing the transmission from a 2004 Ford Freestar is as follows: remove the bolts that secure the transmission to the engine, then remove the transmission.
1. Disconnect the negative battery cable.

2. Raise and safely support the vehicle.

3. Drain the transmission fluid.

4. Disconnect the transmission cooler lines.

5. Disconnect the shifter cable from the transmission.

6. Remove the drive shafts.

7. Disconnect the electrical connectors from the transmission.

8. Support the transmission with a transmission jack and remove the bolts attaching the transmission to the engine.

9. Carefully lower the transmission and remove it from the vehicle.

10. Reverse the process to install the new or rebuilt transmission.

Here

Is a video that may help as well: https://www.youtube.com/watch?

v=3Iu1WyDLxzg

What Tools Will I Need To Remove The Transmission From My 2004 Ford Freestar?

To remove the transmission from a 2004 Ford Freestar, you will need a transmission jack, a ratchet and socket set, and a wrench set.

How to Remove the Transmission from a 2004 Ford Freestar

Removing the transmission from your 2004 Ford Freestar may seem like a daunting task, but with the right tools and a little know-how, it’s actually quite easy! Here’s what you’ll need:

-A transmission jack
-A set of transmission jack stands
-A ratchet and socket set
-A breaker bar
-A set of metric wrenches
-A Phillips head screwdriver

First, you’ll need to place the transmission jack underneath the transmission. Once it’s in position, use the ratchet and socket set to remove the bolts that secure the transmission to the engine. There should be four bolts in total.

Next, use the breaker bar and socket set to remove the bolts from the transmission mount. There should be two bolts in total. With the mount bolts removed, you should now be able to lower the transmission down and off of the engine.

Now it’s time to disconnect the transmission lines. There are two lines, one for the transmission fluid and one for the cooler lines. Use the metric wrenches to loosen the fittings and then use the Phillips head screwdriver to unscrew the retaining clip. With the lines disconnected, you can now remove the transmission entirely.

There you have it! With the right tools and a little bit of know-how, removing the transmission from your 2004 Ford Freestar is easy.

FAQ

Hopefully, you are clear on how to remove the transmission from a 2004 Ford Freestar. If you still have any questions, please feel free to comment below.