2002 Ford Windstar Abs Module Location

The ABS module is located under the hood, on the driver’s side, near the firewall.

If you’re looking for the ABS module on your 2002 Ford Windstar, you’ll find it under the hood on the driver’s side. It’s a black box that’s about 6 inches square, and it has a few wires running to it. The module is located near the fender, and it’s held in place by two bolts.

Where Is The ABS Module Located On A 2002 Ford Windstar?

The ABS module is located on the driver’s side, just in front of the firewall.
The anti-lock braking system (ABS) on a 2002 Ford Windstar is located in the front of the vehicle, near the engine. To access the ABS module, you will need to remove the front bumper. The module is located behind the front grille, and is held in place by two bolts.

What Are The Symptoms Of A Bad ABS Module On A 2002 Ford Windstar?

The symptoms of a bad ABS module on a 2002 Ford Windstar are a ABS light on the dash, ABS pump running constantly, and/or Brake light on the dash.

When your ABS light comes on, it’s usually because of a problem with the ABS module. The module is the computer that controls the ABS system, so when it goes bad, the ABS system doesn’t work. This can be a big problem, because the ABS system is designed to help you stop in an emergency.

There are a few different symptoms that can indicate a problem with the ABS module. One of the most common is the ABS light coming on. This can happen even if there’s no problem with the ABS system, because the module is what turns the light on. If the light is on all the time, or if it comes on and off randomly, it’s a good indication that the module is going bad.

Another symptom of a bad ABS module is the ABS system not working properly. This can manifest itself in a few different ways. One way is that the ABS system will kick in when it shouldn’t. For example, if you’re driving on a dry road and you hit the brakes, the ABS system should not kick in. If it does, it’s a sign that something is wrong.

Another way the ABS system can fail is by not working at all. This can be a problem if you find yourself in an emergency situation where you need the ABS system to help you stop. If the ABS system is not working, you may not be able to stop as quickly as you need to, which could be dangerous.

If you’re experiencing any of these symptoms, it’s a good idea to take your car to a mechanic and have them check the ABS module. They can diagnose the problem and let you know if it’s something that can be fixed or if you need to replace the module.


How Do You Replace The ABS Module On A 2002 Ford Windstar?

The first thing you need to do is disconnect the negative battery cable. Next, you need to remove the wheel speed sensor. After that, you can remove the bolts that hold the ABS module in place. Finally, you can install the new ABS module and reconnect the wheel speed sensor.

How Much Does It Cost To Replace The ABS Module On A 2002 Ford Windstar?

ABS modules typically cost around $200-$300, but can be more expensive depending on the make and model of the vehicle. For a 2002 Ford Windstar, the average cost of a replacement ABS module is between $200-$300.

2002 Ford Windstar ABS module location:

David Jon

David Jon

I'm a long-time Ford and automotive enthusiast, and I've been writing about cars for over 10 years. I started Fordmasterx as an effort to combine my two passions – writing and car ownership – into one website. I hope that you find everything you need on our website and that we can help guide you through all your automotive needs.

We will be happy to hear your thoughts

Leave a reply